manualshive.com logo in svg

IBM Multiprise 3000, Справочное руководство, Страница: 64 / 264

Поделиться
Скачать
IBM Multiprise 3000 Скачать руководство пользователя страница 64

 

 

 

Only Read Count, Read Key and Data, Read Data, or Read Count Key and
Data commands can follow a Read R0, Read Count, Read Key and Data,
Read Data, or a Read Count Key and Data command.

If a command in the Locate Record domain does not meet the sequence
requirements, that command is rejected with unit check status. The sense data
contains command reject with format 0, message 2.

If no user data record is detected on the track, the command is rejected with unit
check status. The sense data includes No Record Found.

If the operation continues after reading the last record on a track, the control unit
advances to the next track and reads the first user data record on the next track.
(See “Operations in the Domain of a Locate Record or Locate Record Extended” on
page 4-2.) If the next track does not have a user data record, the command is
terminated with unit check status. The sense data includes No Record Found.

4-26

Internal Disk Subsystem Reference Guide 

 

Содержание Multiprise 3000









































































































































































































































































Отзывы:

Нет отзывов