IBM Multiprise 3000 Скачать руководство пользователя страница 120

Страница: 120 / 264

Search Key High

Description:

The Search Key High command operates the same as a Search Key

Equal command except that status modifier is included in ending status when the
key area compares high to the search argument.

Hex Code

Data Address

Count

49
Multitrack
C9

The main storage location for the
key to compare.

The length of the search
argument.

Search Key Equal or High

Description:

The Search Key Equal or High command operates the same as a

Search Key Equal command except that status modifier is included in ending status
when the key area compares equal or high to the search argument.

Hex Code

Data Address

Count

69
Multitrack
E9

The main storage location for the
key to compare.

The length of the search
argument.

Write Commands

The write commands format records or update areas of existing records on the
track.

Write commands are either

format write commands

update write commands

Format Write Commands:

Establish a count area on the track, and format the

key and data areas of a record. These commands, if not followed immediately by
another format write command, erase the remaining portion of the track after writing
the last area of a record. The format write commands are:

Write Home Address
Write Record Zero
Write Count, Key, and Data
Write Count, Key, Data Next Track
Write Full Track

Erase.

Format write commands must be used to change the format of a record; that is, the
length of the key or data areas of a record.

Update Write Commands:

Update the key and data areas of an existing record

without affecting the format of that record or other records on the same track. The
update write commands are:

Write Key and Data

Write Data

Write Update Key and Data
Write Update Data
Write Track Data

4-82

Internal Disk Subsystem Reference Guide

Содержание Multiprise 3000









































































































































































































































































Результаты поиска

Содержание Multiprise 3000

Отзывы:

IBM Multiprise 3000, Справочное руководство, Страница: 120 / 264

Результаты поиска

Содержание Multiprise 3000

Отзывы: