manualshive.com logo in svg

IBM Multiprise 3000, Справочное руководство, Страница: 217 / 264

Поделиться
Скачать
IBM Multiprise 3000 Скачать руководство пользователя страница 217

 

 

 

 Action 5: 

1. If the chain has not been retried 10 times, repeat the command chain.
2. Do Action 1.

Action 6 Not used.

 Action 7: 

1. Increment the cylinder address of the seek argument in sense bytes 5 and 6

(or 29 and 30) by one. Reset the head address to zero. If the incremented
cylinder address is still in the current extent, go to step 3. Otherwise,
determine the seek address by locating the next extent. If no seek address
exists, do Action 2.

2. If a Define Extent command was performed, go to step 4. Otherwise, continue

with step 3.

3. Continue the operation with the following CCW chain:

4. Continue the operation with the following CCW chain:

Action 8:  

This is a file-protected error. Examine the interrupted CCW to select

step 1, 2, 3, or 4.

1. If the interrupted CCW is a Perform Subsystem Function command, do Action

2.

2. If the interrupted CCW is not a Seek, Seek Cylinder, or Seek Head:

a. If the seek address is still in the current extent, go to step 2b. Otherwise,

determine the seek address by locating the next extent. If no seek address
exists, do Action 2.

b. If a Define Extent command was performed, go to step 2d on page 7-4.

Otherwise, continue with step 2c.

c. Continue the operation with the following CCW chain:

Seek

Argument from step 1

Set File Mask

Same as original

Set Sector

Argument 0

Read Home
Address

Skip bit on

TIC

To the interrupted CCW.

Define Extent

The user’s new extent is compatible with the seek argument from step
1. The other parameters are the same as the original parameters.

Locate
Record

Bytes Contents

0 X

'

40

'

1–3 Zero
4–7

The seek address from step 1

8–11

The seek address from step 1

12–15 Zero

TIC

To the interrupted CCW.

   

Chapter 7. Error Recovery Procedures

7-3

Содержание Multiprise 3000









































































































































































































































































Отзывы:

Нет отзывов