manualshive.com logo in svg

IBM Multiprise 3000, Справочное руководство, Страница: 155 / 264

Поделиться
Скачать
IBM Multiprise 3000 Скачать руководство пользователя страница 155

 

 

 

 Restore

Description:  

The Restore command does not cause any data transfer. Therefore,

if the CCW has a nonzero byte count, the suppress length indication (SLI) bit must
be set to ‘1’ to avoid an incorrect length exception.

Note:  

Do not use this command when writing new applications. This command is
provided only to maintain compatibility with other IBM disk devices.

The Restore command resets orientation in the storage path. This command does
not do any action at the logical volume, except to check logical volume status.

Chaining and Restrictions:  

The Restore command is valid only on 3380 logical

volumes, not on 3390 logical volumes. If the command is received on a 3390, the
command is terminated with unit check status. The sense data contains command
reject with format 0, message 1.

This command is not valid in the domain of a Locate Record or Locate Record
Extended. If the Restore command is in a Locate Record or Locate Record
Extended domain, it is rejected with unit check status. The sense data contains
command reject with format 0, message 2.

Ending Status:  

The Internal Disk Subsystem presents channel end and device

end in initial status after it validates the command.

Hex Code

Data Address

Count

13

Must not exceed addressing capacity.

0

   

Chapter 4. Command Descriptions

4-117

Содержание Multiprise 3000









































































































































































































































































Отзывы:

Нет отзывов