IBM 7013 J Series, Руководство оператора

Страница: 67 / 297

Using the System Unit
2-35
Loading the 1/4-Inch Tape Cartridge
A diagram inside the drive door shows how to load a tape. To load a tape cartridge, push
the unload button. When the button is pushed, the front panel of the drive partially opens
towards the front of the system unit.
1. Pull the front panel open all the way to the flat position, where it will stay without having
to be held open.
2. Insert the cartridge into the drive opening with the window side of the cartridge towards
your left. Gently push the cartridge into the drive opening until the cartridge stops.
Window Side of
the 1/4–Inch Tape
Figure 1. Inserting a 1/4-Inch Cartridge in the Drive
3. Close the front panel until you hear an audible click.
The drive loads the tape from the cartridge and prepares it for reading and writing.
Once the cartridge has been inserted and the front panel closed, it will automatically rewind
to the beginning of the tape.