IBM 7013 J Series, Руководство оператора

Страница: 102 / 297

3-22
Operator Guide
Display Configuration
Use this option to view the system hardware configuration. This option provides different
screens with the following levels of information:
•
System-level information
•
Unit-level information
•
Device-level information.
Enter
0
in the MAINTENANCE MENU to select the Display Configuration option.
Display Configuration – System Level
This screen displays general system information, such as:
•
Firmware release number.
•
Machine ID.
•
Service Contract status.
•
Total memory size, and other information.
DISPLAY CONFIGURATION
MACHINE TYPE/MODEL: 7013/J30
FIRMWARE RELEASE: Standby –> 1300
Backup eprom –> 0401
Flash eprom –> 0401
SERVICE CONTRACT: Last update (yymmdd) –> 941105
Validity–> 360 Days
Remote service support –> Valid
Quick On Call service –> Not valid
AUTO DIAL: Disable
CONSOLES: BUMP Console –> Present
Service Console –> Disable – 1200 Baud
SYSTEM ID: 000ABCDE
(Contains the serial
number of the unit)
NUMBER OF CPU: 2
MAIN MEMORY SIZE: 128 MByte
PRESENT UNITS: #0 ,#1
SELECT [Unit# (0–7) or x:exit]:
To view information for a specific unit, enter a unit number. A unit level screen is displayed,
as described on the following pages.
Note: If and expansion unit is not attached, the
SELECT [Unit# (0–7) or x:exit]
option does not appear, press Enter to continue to the next screen.
Display Configuration – Unit Level
This is the second screen in the configuration group. When selected, you see two different
types of screens:
•
Main Unit
•
Expansion Unit.
The main unit screen, shown below, displays unit level parameters such as: