IBM 7013 J Series, Руководство оператора

Страница: 294 / 297

X-6
Operator Guide
SBB_ECMD, G-2
SBB_GATEWAY, G-1
SBB_MENU, G-2
SBB_PCMD, G-2
WAIT_POWER_ON, G-2
WAIT_REBUILDING, G-3
power states, system, G-1
power-on from BUMP console, G-3
power-on using the power-on button, G-4
preventive maintenance, 8 mm tape drive, 2-20
printers, 2-13
problem determination procedure, considerations, 8-1
process supplemental media task, 6-3
product topology service aid, 6-13
R
removal and installation procedures
disk drive, rear, 4-10
front media or disk device, 4-8
run diagnostics task, 6-2
run error log analysis task, 6-2
running diagnostic programs from CD-ROM, 5-2
S
SCSI, external, address record, F-1
SCSI and non-SCSI devices, location code table,
1-11
SCSI bus analyzer task, 6-13
SCSI bus service aid, 6-13
SCSI tape utilities service aid, 6-14
service aid, service hints, 6-15
service aids, 6-1, 6-7
AIX shell prompt service aid, 6-4
backup/restore media service aid, 6-4
bit error rate service aid, 6-4
bringup micro-processor, 6-4
change diagnostic run time options task, 6-2
diagnostic package utility, 6-5
dials and LPFK configuration, 6-5
disk maintenance, 6-6
disk media, 6-7
disk to disk copy, 6-6
diskbased diagnostic update, 6-6
diskette media, 6-9
display and change diagnostic test list service aid,
6-10
display diagnostic run time options task, 6-2
display or change configuration or vital product
data, 6-9
display or change key modes, 6-11
display previous diagnostic results, 6-11
display test patterns, 6-11
display/alter bootlist, 6-9
for use with ethernet, 6-14
generic microcode download, 6-11
hardware error report, 6-12
list, 6-3
local area network, 6-12
microcode download, 6-12
multiprocessor, 6-12
periodic diagnostics, 6-13
process supplemental media task, 6-3
product topology, 6-13
run error log analysis task, 6-2
running diagnostics task, 6-2
SCSI bus, 6-13
SCSI tape utilities, 6-14
SSA, 6-15
trace, 6-15
service aids for use with ethernet, 6-14
service hints service aid, 6-15
Service Line Speed Parameter, 3-37
services aids, 7318 serial communications network
server, 6-16
Set Mode to Normal when Booting Flag, 3-36
setting the write-protect tab
4mm tape cartridge, 2-26
8mm tape cartridge, 2-17
setting voltage margins, 3-20, 3-33
SSA service aid, 6-15
starting the system unit, 2-9
methods, 2-9
manual, 2-10
turning power on, 2-10
status lights, 5.0 GB 8 mm tape drive, 2-28
stopping the system unit, 2-9
manually, 2-11
supplies, part numbers, D-1
system power states, G-1
system unit, using, 2-1
system verification procedure, 7-1
considerations, 7-1