05
5-7
ś
If you lock the doors using the door
handle button or touch sensor,
the doors are not locked under the
following circumstances:
- The Smart Key is in the vehicle.
- The Button Start ignition switch is in
the ACC or ON position.
- Any door is open (except for the
liftgate).
If this occurs, a chime sounds for
about 3 seconds. Check the vehicle
before attempting to lock the vehicle
again.
Information
Before you leave your vehicle with the
Smart Key, verify that your vehicle is
locked. When using the touch sensor on
the front door handle, listen to hear that
the lock has actuated, and then pull the
handle within 3 seconds to confirm the
doors are locked.
(If it has been longer than 3 seconds,
verify the doors are locked by pressing
the lock button on the Smart Key. You
can hear a single beep.)
WARNING
Do not leave the Smart Key in your
vehicle with children that are unattended
or unsupervised.
Children could unintentionally press
the Button Start ignition switch or
could operate the power windows or
other vehicle controls or even cause
the vehicle to move. This may result in
serious injury or death.
Unlocking your vehicle (Button type)
ODN8059001
To unlock:
1. Have the smart key with you.
2. Press the door handle button or press
the Door Lock button
N
on the smart
key. The chime sounds and hazard
warning lights blink two times. Also,
the side view mirrors unfold if
On
door unlock
or
On driver approach
is selected from the Settings menu in
the instrument cluster or infotainment
system.
ś
If you unlock the doors using the
passenger side door handle, all the
doors are unlocked. If you unlock
the doors using the driver side door
handle, either the driver’s side door
is unlocked or all the doors are
unlocked depending on the setting
for the Two Press Unlock feature.
Change the Driver Door unlock
mode by referring to “Setting the
Two Press Unlock feature”.
