Convenience Features
5-24
Power Windows
The ignition switch must be in the ON
position to be able to raise or lower
the windows. Each door has a Power
Window switch to control the door’s
window. The driver has a Power Window
Lock button that can block the operation
of rear passenger windows. The power
windows will operate for about 3 minutes
after the ignition is turned OFF or if the
ignition is placed in the ACC position, as
long as the front doors remain closed.
If the front doors are opened, the battery
power is turned OFF and the Power
Windows do not operate.
Window opening and closing
OCN7050082
To open:
Press the window switch down to the
first detent position
Q
. Release the
switch when you want the window to
stop.
To close:
Pull the window switch up to the first
detent position
Q
. Release the window
switch when you want the window to
stop.
Auto down window
Pressing the power window switch
momentarily to the second detent
position
R
completely lowers the
window even when the switch is
released.
To stop the window at the desired
position while the window is operating,
pull up or press down and release the
switch.
Auto up/down window (if equipped)
Pressing or pulling up the power window
switch momentarily to the second
detent position
R
completely lowers or
lifts the window even when the switch
is released. To stop the window at the
desired position while the window is
operating, pull up or press down and
release the switch.
Automatic reversal (if equipped)
OCN7050026
If a window senses any obstacle while
it is closing automatically, it stops and
lowers approximately 12 inches (30 cm)
to allow the object to be cleared.
If the window detects any resistance
while the power window switch is pulled
up continuously, the window stops
upward movement and then lowers
approximately 1 inch (2.5 cm).
If the power window switch is pulled
up continuously again within 5 seconds
after the window is lowered by the
automatic window reverse feature, the
automatic window reverse does not
operate.
