05
5-17
ONX4050007
The Integrated Memory System for the
driver’s seat is equipped on some models
and allows the driver to store and recall
the driver’s seat position.
WARNING
Never attempt to operate the Integrated
Memory System while the vehicle is
moving.
Information
ś
If the battery is disconnected, the
memory settings are erased.
ś
If the Integrated Memory System
does not operate normally, contact an
authorized HYUNDAI dealer.
Storing Memory Positions
1. Make sure the Button Start ignition
switch is in the ON position and the
gear is in P (Park).
2. Adjust the driver’s seat to the desired
position.
3. Press the
SET
button. The system
beeps once and notifies you to press
the button to save settings on the
cluster display.
4. Press one of the memory buttons (
1
or
2
) within 4 seconds. The system beeps
twice when successfully stored.
5. “Driver 1 (or 2) settings saved” appears
on the cluster display.
Recalling Memory Positions
1. Make sure the Button Start ignition
switch is in the ON position and the
gear is in P (Park).
2. Press the desired button (
1
or
2
). The
system beeps once and the driver’s
seat position is automatically adjusted
to the stored positions.
3. “Driver 1 (or 2) settings applied”
appears on the cluster display.
Information
ś
If you press the SET button or the
corresponding IMS memory button
(1 or 2) for which the settings are
being recalled, the IMS temporarily
deactivates.
If you press the SET button or the
number 1 button with the number
1 setting in operation, the IMS
temporarily deactivates.
If you press the number 2 button,
the IMS memory settings activate
according to number 2.
ś
If you adjust the driver seat settings
while the IMS is adjusting the seat
and the mirror, the system stops the
adjustments.
,17(*5$7('0(025<6<67(0ǣ,)(48,33('Ǥ
