Instrument Cluster
4-12
AUTO STOP indicator light
This indicator light illuminates:
When the engine enters the Idle Stop
mode of ISG (Idle Stop and Go) system.
When the engine automatically starts,
the AUTO STOP indicator on the cluster
Illuminates to white.
For more information, refer to the "ISG
(Idle Stop and Go) system" section in
Chapter 6.
Information
When the ISG system automatically
starts the engine, some warning lights
(ABS, ESC, ESC OFF, MDPS or Parking
brake warning light) may turn on for a
few seconds because of a low battery
voltage but not a system malfunction.
Turn signal indicator light
This indicator light blinks:
When you operate the turn signal lever.
If any of the following occur, there may
be a malfunction with the turn signal
system.
ś
The turn signal indicator light
illuminates but does not blink.
ś
The turn signal indicator light blinks
rapidly.
ś
The turn signal indicator light does not
illuminate at all.
If any of these occur, have the vehicle
inspected by an authorized HYUNDAI
dealer.
High beam indicator light
This indicator light illuminates:
ś
When the headlights are on and the
turn signal lever is moved to the high
beam position.
ś
When the turn signal lever is pulled
into the Flash-to-Pass position.
High Beam Assist indicator
light
This indicator light illuminates:
When the high-beam is on with the light
switch in the AUTO position.
ś
White: When High Beam Assist is
ready to operate.
ś
Green: When High Beam Assist is
operating.
If your vehicle detects oncoming
vehicles in front of you, High Beam Assist
switches the high beam to low beam
automatically.
For more information, refer to the “High
Beam Assist (HBA)” section in Chapter 5.
Cruise indicator light
(if equipped)
This indicator light illuminates:
When the Cruise Control system is
enabled.
For more information, refer to the "Cruise
Control (CC)" section in chapter 7.