
Driver Assistance System
7-70
Smart Cruise Control Operation
Operating conditions
Basic function
Smart Cruise Control operates when the
following conditions are met:
ś
The gear is in D (Drive).
ś
Your vehicle speed is within the
operating speed range.
- 5-110 mph (10-180 km/h): When
there is no vehicle in front
- 0-110 mph (0-180 km/h): When
there is a vehicle in front
ś
ESC (Electronic Stability Control) or
ABS is enabled.
Smart Cruise Control does not operate
when:
ś
The driver’s door is opened.
ś
Engine RPMs are in the red zone.
ś
EPB (Electronic Parking Brake) is
applied.
ś
ESC (Electronic Stability Control) or
ABS is controlling your vehicle.
ś
Forward Collision-Avoidance Assist
braking control is operating (if
equipped).
ś
Remote Smart Parking Assist braking
control is operating (if equipped).
ś
Idle Stop and Go (ISG) system is
operating.
ś
The hands-off warning is on for Lane
Following Assist or Highway Driving
Assist.
Information
If stopped behind another vehicle, you
have to depress the brake pedal to turn
on Smart Cruise Control.
Overtake Assist Control
Overtake Assist Control operates when
the turn signal indicator is turned on to
the left while Smart Cruise Control is
operating, and the following conditions
are met:
ś
Your vehicle speed is above 40 mph
(60 km/h).
ś
A vehicle is detected in front of your
vehicle.
Overtake Assist Control does not operate
when:
ś
The hazard warning flasher is on.
ś
Deceleration is needed to maintain
the distance from the vehicle in front.
WARNING
Be careful when your vehicle temporarily
accelerates to overtake a vehicle in front.