Driver Assistance System
7-56
Warning overspeed
ONX4OB071036
When driving at a speed higher than the
displayed speed limit, the speed limit
appears in red.
Changing set speed
ONX4OB071038
ONX4OB071039
If the speed limit changes when using
Manual Speed Limit Assist or Smart
Cruise Control, an arrow in the direction
of up or down appears to inform you to
change the set speed by pushing the
+
or
–
switch.
WARNING
ś
If you want to drive below the speed
limit, set the Speed Limit Offset under
"0"
or use the
–
switch on the steering
wheel to lower the set speed. If the
Speed Limit Offset is set over
"0"
, the
set speed changes to a speed higher
than the limit for the road.
ś
If necessary, reduce your driving
speed as needed. Even after changing
the set speed according to the speed
limit for the road, your vehicle can still
be driven over the speed limit.
ś
If the speed limit for the road is under
20 mph (30 km/h), the set speed
changing function does not work.
ś
Intelligent Speed Limit Assist operates
using the speed unit set by you from
the settings menu. If the speed unit is
set to a unit other than the speed unit
used in your country, Intelligent Speed
Limit Assist may not operate properly.
Information
ś
For more information on Manual
Speed Limit Assist operation, refer
to the "Manual Speed Limit Assist
(MSLA)" section in this chapter.
ś
For more details on Smart Cruise
Control operation, refer to the "Smart
Cruise Control (SCC)" section in this
chapter.