03
3-41
SRS Components
ONX4030055
The SRS consists of the following
components:
M
Driver's front airbag module
N
Passenger's front airbag module
O
Side airbag modules
P
Curtain airbag modules
Q
Retractor pretensioner
R
Airbag warning light
S
SRS control module (SRSCM)/Rollover
sensor
T
Front impact sensors
U
Side impact sensors
V
Side pressure sensors
Emergency fastening device system
Occupant classification system
Seat belt buckle sensor
Where are the Airbags?
Driver’s and passenger’s front
airbags
Driver’s front airbag
OCN7030036
Passenger’s front airbag
ONX4030037
The SRS consists of advanced airbags
located in the center of the steering
wheel and the passenger’s side front
panel pad above the glove box.
The airbag locations are embossed with
the letters “AIRBAG”.
The purpose of the SRS is to provide the
vehicle's driver and front passenger with
additional supplemental protection that
the seat belt system does not provide
in case of a frontal impact of sufficient
severity.
The SRS uses sensors to gather
information about the driver’s and front
passenger's seat belt usage and impact
severity.
The seat belt buckle sensors determine
if the driver and front passenger's seat
belts are fastened. These sensors provide
the ability to control the SRS deployment
based on whether or not the seat belts are
fastened, and how severe the impact is.
