
07
7-93
Information
You can change the
Warning Volume
settings or select
Driving Safety Priority
for Highway Driving Assist from the
Settings menu. For more information,
refer to the "Driver Assistance System
Settings" section in this chapter.
Highway Driving Assist
Operation
Highway Driving Assist display
The status of the Highway Driving Assist
operation appears in Driving Assist mode
on the instrument cluster. Refer to the
"View Modes" section in Chapter 4.
Standby state
Operating state
OTMA070010
OTMA070009
ᶃ
Indicates if there is a vehicle ahead
and the selected distance level
appears.
Highway Driving Assist indicator light
- Green
: Operating state
- White
: Standby state
- Indicator light off: Off state
ᶄ
Set speed appears.
ᶅ
Lane Following Assist indicator light
appears.
ᶆ
Detected ahead and the selected
vehicle distance appears.
ᶇ
Whether the lane is detected or not
appears.
Information
ś
For more information on Smart Cruise
Control and Lane Following Assist,
refer to the "Smart Cruise Control
(SCC)" and "Lane Following Assist
(LFA)" sections in this chapter.
ś
The images and colors in the
instrument cluster may differ
depending on the cluster type or
theme selected from the settings
menu.
Highway Driving Assist operating
Highway Driving Assist operates when:
ś
You have pressed the Driving Assist
button after entering or driving on
controlled access roads.
ś
Entering or driving on controlled
access roads with both Lane
Following Assist and Smart Cruise
Control operating.
Restarting after stopping
OTM070114L
When Highway Driving Assist is
operating, your vehicle stops if the
vehicle ahead of you stops. Also, if the
vehicle ahead of you starts moving
within 30 seconds after the stop, your
vehicle starts as well. If your vehicle has
stopped and 30 seconds have passed,
the "Use switch or pedal to accelerate"
message appears on the instrument
cluster. Depress the accelerator pedal
or push the
+
/
-
switch
button to
accelerate.