DRIVING YOUR HYUNDAI
2- 3
C070C01A-AAT
To Remove The Ignition Key
1. Turn the ignition key to the "ACC" position.
C050A01A-AAT
STARTING
C050A01E
WARNING:
Never run the engine in a closed or poorly
ventilated area any longer than is needed to
move your car in or out of the area. The
carbon monoxide gas emitted is odorless
and can cause serious injury or death.
o "ACC"
With the key in the "ACC" position, some electri-
cal accessories (radio, etc.) may be operated.
o "LOCK"
The key can be removed or inserted in this
position.
To protect against theft, the steering wheel locks
by removing the key.
NOTE:
To unlocking the steering wheel, insert the
key, and then turn the steering wheel and key
simultaneously.
2. Simultaneously push and turn the ignition key
counterclockwise from the "ACC" position to
the "LOCK" position.
3. The key can be removed in the "LOCK"
position.
C050B01HP-GAT
Starting Procedure
1. Insert key, and fasten the seat belt.
2. Apply the parking brake.
3. If your Hyundai is equipped with a manual
transmission, place the shift lever in neutral
and depress the clutch pedal fully. If your
Hyundai has an automatic transmission, place
the shift lever in "P" (park).
4. On vehicles equipped with the diesel preheat
indication lamp, turn the ignition key to the
"ON" position. The diesel-preheat indication
lamp will first illuminate in amber, and then
after a short time, the amber illumination will
go off, indicating that preheating is complet-
ed.
C050B01HP
Amber lamp OFF
Amber lamp ON
C070C01E
LOCK
ACC
ON
START
LOCK
ON
START
