CONTROLS AND EQUIPMENT
1- 67
WARNING:
o Keep the main switch off when not using
the cruise control.
Use the cruise control system only when
traveling on open highways in good
weather.
o Do not use the cruise control when it
may not be safe to keep the car at a
constant speed, for instance, driving in
heavy or varying traffic, or on slippery
(rainy, icy or snow-covered) or winding
roads or over 6% up-hill or down-hill
roads.
o Pay particular attention to the driving
conditions whenever using the cruise
control system.
o During cruise-speed driving with manual
transmission vehicle, do not shift into
neutral without depressing the clutch
pedal, since the engine will be overrevved.
If this happens, depress the clutch pedal
or release the main switch.
o During normal cruise control operation,
when the set button is activated or reac-
tivated after applying the brakes, the
cruise control will energize after approxi-
mately 3 seconds. This delay is normal.
B660E01L-EAT
To Reset at a Faster Speed
1. Push the control switch "RESUME (ACCEL)"
2. Accelerate to desired speed. Whilst the con-
trol switch is held, the vehicle will gradually
gain speed.
B660D01L-AAT
To Resume the Preset Speed
The vehicle will automatically resume the speed
set prior to cancellation when you push the
control switch "RESUME (ACCEL)" (when trav-
elling above 25 mph).
B660D01HP
B660F01L-EAT
To Reset at a Slower Speed
B660B01HP
1. Push the control button "SET (COAST)".
The vehicle will decelerate.
2. When the desired speed is obtained, re-
lease the control button. Whilst the control
switch is pushed, the vehicle speed will
gradually decrease.
o Decrease the vehicle speed lower than
memory speed by 9 mph (15 km/h).
o Decrease the vehicle speed approximately
to less than 25 mph (40 km/h).
o Release the main switch.
