CONTROLS AND EQUIPMENT
1- 47
ZB120D1-E
HIGH AND LOW BEAM
To turn on the headlight high beams, push the
lever forward (away from you). For low beams,
pull the lever back (toward you). The appropri-
ate headlight beam indicator light will come on
at the same time.
B340C03FC-EAT
LIGHTING SWITCH
The vehicle sidelights and headlights are oper-
ated by rotating the end of the turn signal switch
barrel. To operate the parking lights, rotating
the switch to the first detent with ignition switch
at the "OFF" position will cause the lights to
illuminate. To operate the headlights, the turn
signal switch barrel should be rotated to the
second detent. The headlights will only operate
when the ignition switch is at the "ON" position.
If the ignition switch is turned to the "OFF"
position, only the parking lights will function.
NOTE:
The ignition must be in the "ON" position to
turn on the headlights.
B340C01HP.DAG
Sidelight auto cut
If you do not turn the sidelight "OFF" after
driving, the sidelight will automatically shut "OFF"
when the driver's door is opened.
To turn them "ON" again, you must simply turn
the ignition key to the "ON" position.
SB220E1-E
HEADLIGHT FLASH
The headlights may be flashed by pulling the
turn signal switch lever towards the steering
wheel. The headlights will be extinguished when
the switch is released.
B340E01HP.DAG
