CONTROLS AND EQUIPMENT
1- 51
are not damaged by rings or jewellery whilst
the glass is being cleaned.
NOTE:
The ignition must be in the "ON" position for
the heated rear window to operate.
B400A01HP
B400A01HP-EAT
DIGITAL CLOCK
There are five control buttons for the digital
clock. Their functions are:
1.
HOUR
- Push "H" to advance the hour
indicated.
2.
MIN
- Push "M" to advance the minute
indicated.
3.
RESET
- Push "S" to reset minutes to ":00"
to facilitate resetting the clock to the correct
time. When this is done:
Pressing "S" between 10 : 30 and 11 : 29
changes the readout to 11 : 00.
Pressing "S" between 11 : 31 and 12 : 29
changes the readout to 12 : 00.
4.
MODE
- Push "MODE" button to display a
12- or 24-hour clock.
When the 12-hour clock is in use, the letters
AM or PM appear with the time.
5. - The time is displayed on the LCD by
pushing in on the switch and is turned off by
pushing in on the switch again.
SB250A2-E
HEATED FRONT/REAR WINDOW
(Not all models)
B380A02HP
To operate the heated front/rear window de-
press the switch shown. The heated front/rear
window will automatically turn off after 20 min-
utes or when the ignition is turned off.
The system may be turned off manually by
depressing the switch again.
CAUTION:
The inside of the front/rear windscreen should
never be cleaned with a hard or sharp imple-
ment since damage to the heating element
may occur. The glass should only be cleaned
with a soft cloth or chamois leather with the
use only of a mild detergent or proprietary
glass cleaner where necessary. Only hori-
zontal movement of the cloth should be made
when cleaning the glass and care should be
exercised to ensure that the heating elements
are not damaged by rings or jewellery whilst
the glass is being cleaned.
NOTE:
The ignition must be in the "ON" position for
the heated rear window to operate.
Type A
Type B
