IN CASE OF EMERGENCY
3-6
ZD070F1-E
4. Loosen Wheel Nuts
The wheel nuts should be loosened slightly
before raising the car. To loosen the nuts, turn
the wheel brace counterclockwise. When doing
this, be sure that the socket is seated com-
pletely over the nut so it cannot slip off. For
maximum leverage, position the wheel brace so
the handle is to the right as shown in the
drawing. Then, whilst holding the wheel brace
near the end of the handle, pull up on it with
steady pressure. Do not remove the nuts at
this time. Just loosen them about one-half turn.
D060D01HP
D060F02HP
D060F02HP-EAT
6. Raising the Car
D060F01HP
o Open the lid at the left corner of the luggage
compartment.
o Loosen the hexagonal bolt, and then take
out the jack.
Ram
Hexagonal Bolt
Release
valve
D060E01A-AAT
5. Put the Jack in Place
The base of the jack should be placed on firm,
level ground. The jack should be positioned as
shown in the illustration.
D060E01HP-1
D060E02HP-1
Rear
Front