FEATURES OF YOUR HYUNDAI
1- 9
B070C01HP-GAT
Alarm Stage
CAUTION:
Do not arm the system until all passengers
have left the car. If the system is armed while
a passenger(s) remains in the car, the alarm
may be activated when the remaining
passenger(s) leaves the car.
B070D01HP-AAT
Disarmed Stage
The system will be disarmed when the driver's or
passenger's door is unlocked by depressing the
"UNLOCK" button on the transmitter.
After completion of the step above, the turn
signal lights will blink twice to indicate that the
system is disarmed.
If any door, tail gate or engine hood is not opened
within 30 seconds, the system will be rearmed.
CAUTION:
Only the transmitter can disarm the armed
stage. If the transmitter does not disarm the
system, it is necessary to take the following
steps;
1. Unlock the door with the key, which will
cause the alarm to be activated.
2. Insert the key in the ignition key cylinder
and turn the ignition key to "ON" position.
3. Wait for 30 seconds.
After completing the steps above, the system
will be disarmed.
B070C01HP
The alarm will be activated if any of the following
occurs while the car is parked and the system is
armed.
1) A front or rear door is opened without using
the transmitter.
2) The tail gate is opened without using the
transmitter.
3) The engine hood is opened.
The siren will sound and the turn signal lights will
blink continuouly for 27 seconds (Type B/ Type
A : This happens 3 times). To turn off the system,
unlock the door or tail gate with the transmitter.
CAUTION:
Avoid trying to start the engine while the
system is armed.
B070F01A-GAT
Keyless Entry System (If installed)
Locking doors
1. Close all doors.
2. Push the "LOCK" button on the transmitter.
3. At the same time all doors lock, the turn signal
lights will blink once to indicate that the sys-
tem is armed.
Unlocking doors
1. Push the "UNLOCK" button on the transmit-
ter.
2. At the same time all doors unlock, the turn
signal lights will blink twice to indicate that the
system is disarmed.
B070E02HP-GAT
Replacing the battery
When the transmitter's battery begins to get
weak, it may take several pushes on the button
to lock or unlock the doors, and the LED will not
light. Replace the battery as soon as possible.
Battery type : CR2032(Type A)
or CR1616 (Type B)
