FEATURES OF YOUR HYUNDAI
1- 72
To remove frost or exterior fog on the wind-
shield:
o Set the air flow control to the defrost ( )
position.(The A/C will turn on automatically
and "Fresh" mode will be activated.)
o Set the temperature control to warm.
o Set the fan speed control to position "3" or "4".
NOTE:
When the A/C is operated continuously on
the floor-defrost level (
) or defrost level
(
), it may cause fog to form on the exterior
windshield. If this occurs, set the air flow
control to the face level position ( ) and fan
speed control to the low position.
B720B01HP
B730A01L-AAT
Operation Tips
o To keep dust or unpleasant fumes from
entering the car through the ventilation sys-
tem, temporarily set the air intake control to
the position. Be sure to return the co-
ntrol to the position when the irritation
has passed to keep fresh air in the vehicle.
This will help keep the driver alert and com-
fortable.
o Air for the heating/cooling system is drawn in
through the grilles just ahead of the wind-
shield. Care should be taken that these are
not blocked by leaves, snow, ice or other
obstructions.
o To prevent interior fog on the windshield, set
the air intake control to the fresh air ( )
position, and fan speed to the desired posi-
tion, turn on the air conditioning system, and
adjust temperature control to desired tem-
perature.
The air conditioning is turned on or off by pushing
the A/C button on the heating/air conditioning
control panel.
B740A01S-AAT
AIR CONDITIONING SYSTEM
(If installed)
Air Conditioning Switch
B740A01HP
