CONTROLS AND EQUIPMENT
1- 72
B720A02FC-EAT
DEFROSTING/DEFOGGING
B720A01HP
Use the heating/ventilation system to defrost or
defog the windscreen.
To remove interior fog on the windshield:
o Set the air flow control to the defrost ( )
position.(The A/C will turn on automatically
and "Fresh" mode will be activated.)
o Set the temperature control to the desired
position.
o Set the fan speed control between "1" and
"4" position.
To remove frost or exterior fog on the wind-
shield:
o Set the air flow control to the defrost ( )
position.(The A/C will turn on automatically
and "Fresh" mode will be activated.)
o Set the temperature control to warm.
o Set the fan speed control to position "3" or
"4".
NOTE:
When the A/C is operated continuously on
the floor-defrost level ( ) or defrost level
( ), it may cause fog to form on the exterior
windscreen. If this occurs, set the air flow
control to the face level position ( ) and fan
speed control to the low position.
B720B01HP
B710C01HP.DAG
B710C02HP-AAT
SIDE VENTILATOR
The side ventilators are located on each side of
dashboard. To change the direction of the air
flow, move the knob in the centre of the vent up-
and-down and side-to-side. The vents are
opened when the vent knob is moved to " "
position. The vents are closed when the vent
knob is moved to " ". Keep these vents clear
of any obstructions.
