FEATURES OF YOUR HYUNDAI
1- 20
To fasten your seat belt, pull it out of the retractor
and insert the metal tab into the buckle. There will
be an audible "click" when the tab locks into the
buckle.
The seat belt automatically adjusts to the proper
length only after the lap belt is adjusted manually
so that it fits snugly around your hips. If you lean
B180A02A-GAT
SEAT BELTS-Driver's and
Passenger's 3-Point System with
Webbing Clamp Locking Retractor
(If installed)
To Fasten Your Belt
B180A01L
B170A04A-AAT
HEIGHT ADJUSTABLE FRONT SEAT
SHOULDER BELT (If installed)
B170A01HP
You can adjust the height of the shoulder belt
anchor to one of the 4 positions for maximum
comfort and safety.
If the height of the adjusting seat belt is too near
your neck, you will not be getting the most
effective protection. The shoulder portion should
be adjusted so that it lies across your chest and
midway over your shoulder nearest the door and
not your neck.
To adjust the height of the seat belt anchor, lower
or raise the height adjuster into an appropriate
position. To raise the height adjuster, pull it up. To
lower it, push it down while pressing the height
adjuster button.
Release the button to lock the anchor into posi-
tion. Try sliding the height adjuster to make sure
that it has locked into the position.
WARNING:
o The height adjuster must be in the locked
position when the vehicle is moving.
o The misadjustment of height of the shoul-
der belt could reduce the effectiveness of
the seat belt in a crash.
B160B01A-AAT
Periodic Inspection
It is recommended that all seat belts be inspected
periodically for wear or damage of any kind.
Parts of the system that are damaged should be
replaced as soon as possible.
B160C01A-AAT
Keep Belts Clean and Dry
Seat belts should be kept clean and dry. If belts
become dirty, they can be cleaned by using a
mild soap solution and warm water. Bleach, dye,
strong detergents or abrasives should not be
used because they may damage and weaken the
fabric.
B160D01A-AAT
When to Replace Seat Belts
Entire in-use seat belt assembly or assemblies
should be replaced if the vehicle has been in-
volved in an accident. This should be done even
if no damage is visible. Additional questions
concerning seat belt operation should be direct-
ed to your Hyundai Dealer.
