FEATURES OF YOUR HYUNDAI
1- 65
Driver only
Front Passenger
Full Passengers
Full pass Maximum
Permissible Loading
Maximum Permissible
Loading
0
0
1
2
3
LOADING CONDITION
Switch
position
B340G01HP-GAT
HEADLIGHT LEVELING DEVICE SYS-
TEM (If installed)
To adjust the headlight beam level according to
the number of the passengers and the loading
weight in the luggage area, turn the beam level-
ing switch.
The higher the number of the switch position, the
lower the headlight beam level. Always keep the
headlight beam at the proper leveling position, or
headlights may dazzle other road users.
Listed below are the examples of proper switch
settings. For loading conditions other than those
listed below, adjust the switch position so that the
beam level may be the nearest as the condition
obtained according to the list.
B340G01HP
B660A01S-AAT
CRUISE CONTROL (If installed)
The cruise control system provides automatic
speed control for your comfort when driving on
freeways, toll roads, or other noncongested high-
ways. This system is designed to function above
approximately 40 km/h(25 mph).
B660A01HP
B660B02L-AAT
To Set the Cruise Speed
1. Push in the cruise control main switch. This
turns the system on.
2. Accelerate to desired cruising speed above
40 km/h(25 mph).
3. Push the control switch "SET" (COAST) po-
sition. The "CRUISE" indicator light in the
instrument cluster will illuminate after you
have set the vehicle speed at the desired
speed.
4. Remove your foot from the accelerator pedal
and the desired speed will automatically be
maintained.
5. To increase speed, depress the accelerator
pedal enough for the vehicle to exceed the
preset speed. When you remove your foot
from the accelerator pedal, the vehicle will
return to the speed you have set.
B660B01HP