FEATURES OF YOUR HYUNDAI
1- 49
B340D01A-AAT
High-beam Switch
To turn on the headlight high beams, push the
lever forward (away from you). The High Beam
Indicator Light will come on at the same time. For
low beams, pull the lever back toward you.
B340E01A-AAT
Headlight Flasher
B340E01HP
B340C03L-AAT
Headlight Switch
B340C01HP
To operate the headlights, turn the barrel on the
end of the multi-function switch. The first position
turns on the parking lights, sidelights, tail lights
and instrument panel lights. The second position
turns on the headlights.
NOTE:
The ignition must be in the "ON" position to
turn on the headlights.
Parking Light Auto Cut
If you do not turn the parking lights "OFF" after
driving, the parking lights will automatically shut
"OFF" when the driver's door is opened.
To turn them "ON" again, you must simply turn
the ignition key to the "ON" position.
B340F01A-GAT
Daytime Running Lights
(If Installed)
Your Hyundai is equipped with daytime running
lights. The daytime running lights are used to
improve visibility for oncoming traffic. Your ve-
hicle daytime running lights are designed to
remain on continuously when the engine is oper-
ating even though the headlight switch is in the
"OFF" position. However, the daytime running
lights will be off while the parking brake is applied.
To flash the headlights, pull the switch lever
toward you, then release it. The headlights can
be flashed even though the headlight switch is in
the "OFF" position.
The windshield wiper switch has three positions:
1. Intermittent wiper operation
2. Low-speed operation
3. High-speed operation
NOTE:
To prevent damage to the wiper system, do
not attempt to wipe away heavy accumula-
tions of snow or ice. Accumulated snow and
ice should be removed manually. If there is
only a light layer of snow or ice, operate the
heater in the defrost mode to melt the snow or
ice before using the wiper.
B350A01A-AAT
WINDSHIELD WIPER AND WASHER
SWITCH
B350A01O-1
1
2
3
