OWNER MAINTENANCE
6-10
1. To check the transmission lubricant level,
the vehicle should be placed on level ground
and the level plug removed with a suitable
spanner.
2. If the level is correct, lubricant should begin
to drip from the plug orifice. In this case the
plug should be replaced.
If the level is incorrect, lubricant should be
added until it begins to drip from the plug
orifice at which time the plug should be
replaced.
To Check the Transmission Oil Level
SSA6100B
Park the car on level ground with the engine off.
1. Using a wrench of the correct size, loosen
the oil filler bolt turning it counterclockwise
and remove it with your fingers.
2. Use your finger to feel inside the hole. The
oil level should be at its bottom edge. If it is
not, check for leaks before adding oil. To
refill the transmission or bring the oil level
G100A01HP-EAT
MANUAL TRANSMISSION LUBRICANT
The transmission lubricant should be checked
and/or changed at intervals specified in the
maintenance schedule.
Recommended Lubricant
Use only HYUNDAI GENUINE PARTS MTF
75W/90 (API GL-4).
CAUTION:
The transmission lubricant level should only
be checked when the engine is cold to pre-
lude the possibility of personal injury by
contact with hot components.
G090A01HP
HPG090A1-E
WINDSCREEN WASHER RESERVOIR
REPLENISHMENT
The level of windscreen washer fluid available
should be checked on a daily basis. The level
of fluid will be visible through the side of the
reservoir. When the fluid is to be replenished,
only a proprietary screen wash additive should
be used and in the concentration recommended
by the manufacturer. The windscreen washer
reservoir has a total capacity of 4.5 litres.
CAUTION:
Engine coolant anti freeze must not be used
in the windscreen washer system since dam-
age to the paintwork may result.
Undiluted windscreen washer additive must
not be allowed to come into contact with the
paintwork. If spillage occurs, flush the af-
fected area immediately with water. Do not
operate the windscreen washer for more
than 15 seconds continuously or when the
reservoir is empty since damage to the
washer pump will result.
G100A01HP
Drain plug
Filler plug