HydroQuip 8800 BP Series, Руководство по установке и эксплуатации

Страница: 32 / 52

Main Screen
P
SET RANGE
SET
While the Temperature is
still ashing, press Light.
SET RANGE READY RANGE FLTR1
Main Screen
READY RANGE FLTR1
SET READY SET
1
2
Power-up Screens
Each time the System powers up, a series of numbers is displayed.
After the startup sequence of numbers, the system will enter Priming Mode (See Page 4).
Waiting Several Seconds in the Main Menu
will allow the display to revert to the Main Screen.
Most changes are not saved unless Light is pressed.
Refer to Key above.
If Time of Day is not set
“SET TIME” will
appear in this menu.
Navigation
Navigating the entire menu structure is done with 2 or 3 buttons on the control panel.
Some panels have separate WARM (Up) and COOL (Down) buttons, while
others have a single Temperature button. In the navigation diagrams
Temperature buttons are indicated by a single button icon.
Panels that have two Temperature buttons (Warm and Cool) can
use both of them to simplify navigation and programming where
a single Temperature icon is shown.
The LIGHT Button is also used to
choose the various menus and navigate each section.
Typical use of the Temperature button(s) allows changing the
Set Temperature while the numbers are ashing in the LCD.
Pressing the LIGHT button while the numbers are ashing will
enter the menus.
The menus can be exited with certain button presses. Simply waiting for
several seconds will return the panel operation to normal.
Indicates a Menu Item that
Depends on a Manufacturer
Conguration and
may or may not appear.
Light Cycle if enabled
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel conguration
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
*****
ignores any change to that menu item.
MAIN MENU NAVIGATION
27