HydroQuip 8800 BP Series, Руководство по установке и эксплуатации

Страница: 26 / 52

Plus Ozone Option
▲ IMPORTANT!
Plus Ozone™ generators operate at high voltage and must never come in
contact with water at any time. The #42-0200 kit includes a one-way check valve that must be installed
correctly to prevent the backow of water into the ozone generator. Failure to install the valve or
installing the valve backwards may cause permanent damage and will void the product warranty.
▲ WARNING!
Ozonators exposed to water may cause system electrical problems and
potential harm to the user. DO NOT connect tubing to the ozone generator barb, unless the
check valve has been installed correctly per the instructions
DISABLE PLUS OZONE™ OPTION:
If your spa does not have an ozone vacuum system connection, if you are unsure how to connect
plumbing, or if you choose not to use the Plus Ozone™ it's important to disconnect the electrical
power. To disconnect power, simply disconnect male and female plug connectors as shown in Dia #1,
then coil and store plugs out of the way in the cabinet
OPERATION:
The Plus Ozone™ system is only activated when the main lter pump (pump #1) is operating in low
speed. Reference “Filtration Settings” in this manual to adjust lter cycle duration that will directly
effect the length of time the Plus Ozone™ operates
ABOUT:
Plus Ozone™ is a Corona Discharge (CD) ozone generator that is self- operating, self-regulating and
contains no serviceable parts.
Do not attempt to alter, adjust or repair this device. The Plus Ozone™
generator is automatically activated by system programing, to insure there is no operation without a
means of vacuum delivery.
It is normal to encounter a purication smell at the water surface, conrming ozone is being generated
and delivered. Potency has been regulated on this device, and remains non-adjustable for your safety
and convenience. Ozone gas applies an instant sanitation effect to the water, however is does not
build or maintain a lasting residual. Therefore, ozone becomes ineffective shortly after the generator is
turned off
Ozone generated by this device is solely intended for the sanitation of water and the inner walls of the
delivery piping system by means of direct exposure, the effectiveness and expected benet is strictly
limited to the time during operation.
IMPORTANT! Consult with your spa manufacturer and/or local
pool and spa professional to establish an additional chemical regiment for water care
SERVICE:
1. The Plus Ozone™ barb has a removable intake lter that must be cleaned annually. Remove the
lter (ref lter on Dia #1) and wash with clean water, allow to dry and re-install.
2. The one way check valve should be visually inspected and tested annually to conrm water is
not getting back to the Plus Ozone™ generator.
WARNING!
Disconnect tubing from the generator and electrical connection as described in
“Disable Plus Ozone™ option” immediately if found to have water present in tubing. Contact
your Hydro Quip supplier for replacement valve and tubing.
3. Plus Ozone™ CD generators have a rated life cycle of 9000 hours, after which the output of the
generator is greatly diminished and requires replacement. Calculate your annual operational hours by
multiplying your accumulated daily lter cycle time by 365. This will give you an idea when the
generator will need replacement. Contact you're your Hydro Quip system provider for instructions for
replacement
21