HydroQuip 8800 BP Series, Руководство по установке и эксплуатации

Страница: 4 / 52

2
TERMS / GLOSSARY
Alternating Current connection point (typically high voltage)
Refers to HQ PT# 34-0224. Required for 3rd pump operation
The accumulated total amperage of all items to be placed on a
single breaker
Smaller daughter board connected to main PCB
A pump that has been added to the original equipment system (ie Aux
pump #2 & #3)
Appliance providing compressed air for the purpose of massage therapy
Continuous bare copper wire connecting all metallic object and electrical
components to the equipment & ground rod
Downloadable Balboa Water Application for wireless system control
Electrical wires made from copper alloy materials
An electrical supply to a remote location, having breaker protection and
no additional branch or service connections
The standard position or programming in which the system is tested
and leaves the factory
Movable programming switch located within a switch-bank (on PCB)
Set of switches used to change operational logic and system behavior
(on PCB)
Pump exit side (piping placed on pressure side of pump)
Electrical power supplied by two individual wiring sources (two breakers)
Wiring provided inside gas heaters, that can be connected to 8000
systems for operational control. Commonly called a fireman circuit
Ground Fault Circuit Interrupter. Specialty breaker with a detection and
reaction device to interrupt power when current leaking is detected to
ground
Main 8000 system breaker, required 4 wires with incorporated “Neutral”
Optional breaker for independent heater operation. Required 3-wire
connection, without “Neutral”
Provided wires for connection of heaters in the dual source
configuration
Circuit board electrical posts for logic changes.
AC Connection
Additional Panel Button
Amperage Requirement
AUX PCB
Auxiliary Pump
Blower
Bonding Wire
™
BWA APP
Copper Conductors
Dedicated Circuit
Default Programming
Dip Switch
Dip Switch Banks
Discharge
Dual Source Wiring
Gas Heater Control Circuit
GFCI Breaker
GFCI breaker #1
GFCI breaker #2
Heater Input Leads
Jumper Pins