HydroQuip 8800 BP Series, Руководство по установке и эксплуатации

Страница: 5 / 52

3
TERMS / GLOSSARY
KW
Line of Sight
Logic Jumper
Liquid Tight Conduit
Main Control
Main Pump or Pump #1
NEC
PCB
Persistent Memory
Plus Ozone
™
/Ozonator
Priming
Pump Amperage
Pump Pot/Basket
Single Source Wiring
Sub Panel
Suction
System Data Label
System Disconnect
Terminal Strip
Total System Amps
Wi-Fi Enabled
Kilowatt. Heater resistance rating used for identifying energy consumption.
A clear and unobstructed path, in which an object or item can be spotted from
or near the spas edge.
Movable coupling located on the jumper pins for changing operational
behavior
Tubing that resists water and debris penetration, made specifically for
wiring
In reference to the 8000 series control box, with factory provided components
System provided pump used for heating and filtration
National Electrical Code. Regulations for design and materials on electrical
installation.
Printed Circuit Board (refers to main board)
Programming that remains unchanged, until the power is turned off and back
on
Appliance designed for spa water sanitation
Initial pump operation until the air is evacuated from the pump and supply
lines
The highest amperage measured, when the pump is under full load
condition
Reservoir mounted to the pump with removable lid and strainer basket
Electrical power supplied by a single wiring source and breaker
(one breaker)
An electrical service box mounted remotely from the main house power panel
Pump front inlet side (piping between spa suctions and pump pot)
Label placed on control box providing serial identification, and vital data
An easy and safe means of 100% electrical disconnection, without
obstruction or the need for tools. See NEC and UL qualifications for approved
devices.
Electrical connection point for components within the PCB cabinet
Highest amperage measured when all components are operating
simultaneously
Having the capacity to control using a wireless connection