HydroQuip 8800 BP Series, Руководство по установке и эксплуатации

Страница: 41 / 52

Sensor-Related Messages
READY RANGE FLTR1
Call for Service.
Miscellaneous Messages
No Communications
The control panel is not receiving communication from the System. Call for Service.
Pre-Production Software
The Control System is operating with test software. Call for Service.
READY RANGE FLTR 1
.
°F or °C is replaced by °T
The Control System is in Test Mode. Call for Service.
Sensor Balance is Poor – M015
The temperature sensors MAY be out of sync by 2°F or 3°F. Call for Service.
Sensor Balance is Poor* – M026
The temperature sensors ARE out of sync. The Sensor Balance is Poor fault has been established for at least 1 hour.
Sensor Failure – Sensor A: M031, Sensor B: M032
A temperature sensor or sensor circuit has failed. Call for Service.
* This message can be reset from the topside panel with any button press.
SPASIDE MESSAGES
36