Husqvarna Viking Designer Jade 35, Руководство пользователя

Страница: 56 / 84

Darning and Mending
Select fabric type and stitch 1:21
Darning a small hole or a tear before it becomes larger can
save a garment. Choose a fine thread in a color as close to
your garment as possible.
1. Place the fabric in position under the presser foot.
2. Start sewing above the hole and over it.
3. Once over the hole, press the reverse button. Continue
sewing. The machine sews back and forth across the hole
16 times and then stops.
4. The LED next to the STOP button is lit automatically,
indicating that the darning stitch can be repeated with the
same size. Reposition your fabric, then step on the foot
control to sew again. The stitch will now repeat the same
size darning square. The machine will stop automatically
when the stitch is completed. To cancel the repeat
function, press the STOP button.
Bartack (Manual)
Woven heavy and stitch 1:22.
Secure elastic ends, drapery pleats, belt loops, and pocket
corners with the same look as ready-to-wear.
• Place fabric under the presser foot.
• Lower the presser foot.
• Step on the foot control.
1. Your machine will sew a straight stitch until you press
reverse.
2. Your machine will then sew in reverse until you press
reverse again.
3. Your machine will then sew a zigzag, covering the
straight stitches.
4. Press reverse to automatically tie off.
56 5 Sewing Techniques