Husqvarna Viking Designer Jade 35 страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 84

background image

This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including the
following:

Read all instructions before using this household sewing machine. Keep the instructions at a suitable
place close to the machine. Make sure to hand them over if the machine is given to a third party.

DANGER –TO REDUCE THE RISK OF ELECTRIC SHOCK:

• A sewing machine should never be left unattended when plugged in. Always unplug this sewing

machine from the electric outlet immediately after using and before cleaning, removing covers,
lubricating or when making any other user servicing adjustments mentioned in the instruction
manual.

WARNING –TO REDUCE THE RISK OF BURNS, FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSON:

• Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by

or near children.

• Use this sewing machine only for its intended use as described in this manual. Use only

attachments recommended by the manufacturer as contained in this manual.

• Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if

it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest
authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

• Never operate the sewing machine with any air openings blocked. Keep ventilation openings of

the sewing machine and foot control free from the accumulation of lint, dust, and loose cloth.

• Keep fingers away from all moving parts. Special care is required around the sewing machine

needle.

• Always use the proper needle plate. The wrong plate can cause the needle to break.

• Do not use bent needles.

• Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

• Wear safety glasses.

• Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as

threading needle, changing needle, threading bobbin, or changing presser foot, etc.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate where aerosol (spray) products are being used or where oxygen is being

administrated.

• To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• The foot control is used to operate the machine. Avoid placing other objects on the foot control.

• Do not use the machine if it is wet.

«
1
2
3
4
...
»

Содержание Designer Jade 35





















































































Отзывы:

Нет отзывов

Похожие инструкции для Designer Jade 35

Бренд: Oki Страницы: 50

Бренд: Janome Страницы: 45

Бренд: Janome Страницы: 32

Бренд: Clarke Technology Страницы: 54

Бренд: Kärcher Страницы: 300

Бренд: Clarke Страницы: 4

Бренд: Riccar Страницы: 22

Бренд: Singer Страницы: 24

Бренд: Gammill Страницы: 3

Бренд: Cleanfix Страницы: 16

Бренд: JB Systems Страницы: 14

DDL-5600N Series

Бренд: JUKI Страницы: 48

Бренд: Philips Страницы: 54

Бренд: Philips Страницы: 59

Бренд: Peach Страницы: 26

Бренд: Nilfisk-Advance Страницы: 44

Бренд: ZOJE Страницы: 26

Бренд: Husqvarna Viking Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды