Husqvarna Viking Designer Jade 35 Скачать руководство пользователя страница 14

Страница: 14 / 84

Pack Away After Sewing

1. Press the ON/OFF switch to “O”.

2. Unplug the cord from the wall socket and then from the

machine.

3. Unplug the foot control cord from the machine. Wind

the cord around the foot control and place it inside the
storage box.

4. Place all accessories in the accessory tray. Slide the tray

on to the machine around the free arm.

5. Place the storage box on the machine and turn the

locking device to lock the box in place.

LED Lights

Your machine has LED lights which distribute the light
evenly over the sewing area and eliminate shadows.

Free Arm

To use the free arm, slide off the accessory tray. Remove the
tray by sliding it to the left.

Use the free arm to facilitate sewing pant legs and sleeve
hems.

To replace the accessory tray, slide it onto the machine until it
fits in place.

Mounting Machine in Sewing Cabinet

There are two holes on the underside of the machine
designed for mounting the machine into a sewing cabinet.
Attach the machine with M6 screws.

2 Preparations

Содержание Designer Jade 35




















































































Результаты поиска

Содержание Designer Jade 35

Отзывы:

Бренды по названию

Популярные бренды

Husqvarna Viking Designer Jade 35, Руководство пользователя

Результаты поиска

Содержание Designer Jade 35

Отзывы:

Бренды по названию

Популярные бренды