Husqvarna Viking Designer Jade 35, Руководство пользователя

Страница: 73 / 84

Connect USB Embroidery Stick
If you attach the embroidery unit or press the stitch menu
button in embroidery mode without having a USB stick
connected, this pop-up message will appear. Connect a USB
stick and press the OK button so that you can load a design.
This pop-up message also appears if the USB stitck is
removed while a design is being loaded or stitched out.
The Data on the USB Embroidery Stick is Not Readable
This pop-up message will appear when your sewing machine
can not access the information on the USB embroidery stick.
The USB stick could be damaged or you might be using a
USB stick that is non-compatible with the sewing machine.
Press the OK button to close the pop-up message.
Embroidery Finished
A pop-up message informs you when the embroidery is
finished. Press the OK button to close the pop-up message.
Embroidery Too Large
This pop-up message appears if the size of the design you are
trying to load is too large or if the design contains too many
stitches. Your machine can load designs containing up to
50.000 stitches. Press the OK button to close the pop-up and
select another design.
Stop Command in Design
Your machine stops automatically for you to trim the fabric
on cut work, applique etc. See explanation for each design in
the DESIGNER JADE™ 35 sampler book.
Read about the sampler book on page 59.
This Will Restart and Clear All Adjustments, Return to Stitch Out?
This pop-up message will appear if you press the program
mode button after starting the embroidery to go back to the
text editor and change an existing embroidery text. If you
select no the text editor will open and all your adjustments
made in embroidery mode will be cancelled. If you select yes
you will return to embroidery mode and all your adjustments
will be kept. Use the arrow buttons to select yes or no and
press the OK button.
7 Embroidery Mode 73