Husqvarna Viking Designer Jade 35, Руководство пользователя

Страница: 69 / 84

Mirror End to End
Press the mirror end to end button (D) to mirror the loaded
design end to end. An icon is shown on the graphic display
indicating that mirror end to end is selected.
Hoop Options
Press the hoop options button (A) to open a list of hoop
options. Use the up/down arrow buttons to make a selection
and confirm by pressing the OK button. Close the hoop
options menu by pressing the hoop options button again or
select the current stitch position.
Hoop Size
When a design is loaded to the embroidery area the smallest
hoop that fits the design is automatically selected.
Use the right arrow button to open a list of available hoop
sizes, including hoops that are available to purchase from
your authorized retailer. Depending on the size of the design,
some hoops may not be available for selection.
Use the up and down arrow buttons to select a different
hoop and confirm your selection by pressing the OK button.
Note: If you start embroidering and the hoop you have selected is not the
same as the hoop attached to the embroidery unit, a pop-up message will
appear to inform you. Attach the correct hoop or select another hoop in
the list.
Current Stitch
If you have selected one of the hoop positions and want to
return to the current stitch and start embroidering where the
embroidery was interrupted, select current stitch. You can
also press the start/stop button once to return to current
stitch and start to embroider.
Park Position
When you have finished your embroidery, remove the hoop
and select park position. The embroidery arm will be placed
in the position for storing your embroidery unit.
Note: It is very important that the hoop is removed, otherwise the hoop,
needle or presser foot may be damaged.
Trim Position
Trim position will move the hoop towards you, making it
easier to trim fabric when embroidering an appliqué.
Center Position
Use the center position if you want to check where the center
position of the hoop will be placed on the fabric.
7 Embroidery Mode 69