Husqvarna Viking Designer Jade 35, Руководство пользователя

Страница: 52 / 84

One-Step Buttonhole
Note: Always sew a test buttonhole on a scrap piece of fabric.
1. Mark the position of the buttonhole on your project.
2. Attach One-Step Buttonhole Foot C and pull out the
button holder plate (A). Insert the button. The button
will determine the length of the buttonhole.
3. Make sure that the thread is pulled through the hole in
the presser foot and placed under the foot.
4. Position your project under the presser foot so that the
marking on the fabric is aligned with the center of the
buttonhole foot.
5. Lower the buttonhole lever (B) all the way down.
Note: The machine will not start to sew if the buttonhole lever is
not lowered properly or the frame of buttonhole foot is not positioned
all the way forward.
6. Hold the end of the upper thread and start sewing. The
buttonholes are sewn from the front of the presser foot
to the back.
7. Once the machine has sewn the buttonhole, raise the
presser foot.
52 5 Sewing Techniques