Husqvarna Viking Designer Jade 35, Руководство пользователя

Страница: 63 / 84

8. After stitching a few stitches, the machine stops and a
pop-up message appears on the graphic display asking
you to cut the thread end. Cut the thread and press the
start/ stop button to continue embroidering.
Note: Automatic stop for cut is activated by default. Open the SET menu to deactivate this setting. Automatic stop for cut is disabled if you use the
foot control when embroidering.
9. When the first color is completed, your machine stops.
A pop-up message appears on the graphic display
asking you to change color. Re-thread with the next
color and continue embroidering by pressing the start/
stop button. Each color segment is tied off at the end
and the needle and bobbin threads are cut.
Note: When you start embroidering again, hold the thread end so you can easily remove it when cut.
10. When the embroidery is completed your machine stops
automatically. The needle and bobbin thread are cut.
Raise the presser foot for easy removal of the hoop. A
pop-up message informs you that your embroidery is
finished. Close the pop-up message by pressing the OK
button.
6 Embroidery Preparations 63