Husqvarna Viking Designer Jade 35, Руководство пользователя

Страница: 33 / 84

16. Recommendation to remove presser foot when sewing
on buttons.
17. Recommendation to lower the feed teeth is shown when
sewing on buttons is selected.
18. Recommendation to use the multipurpose tool/button
reed (optional accessory, part number 4131056–01) when
sewing on a button.
19. Set the number of stitches to sew on the button by
pressing the up and down navigator arrows (C).
20. Stitch density is shown instead of stitch length when a
satin stitch, buttonhole, bartack or darning stitch is
selected. Reduce or increase the stitch density by pressing
stitch length – and + (A).
21. Recommendation for corded buttonhole. When sewing
buttonholes in stretch fabric, we recommend to cord the
buttonhole for better durability, see Corded Buttonhole
(Stretch Fabrics), page 54.
22. Elongation is shown instead of density if alternate view
button is pressed when a satin stitch is selected. Reduce
or increase the elongation by pressing the + or – (A).
23. Recommendation to use self adhesive glide plates (see
Presser Feet, page 9).
24. When sewing a darning or bartack program, the reverse
icon is shown to indicate that you need to press reverse
when the darning or bartack stitch is sewn to the desired
length.
3 Sewing Mode 33