Human Touch feel better HT-044PS, Инструкция по использованию и уходу

Страница: 31 / 35

Release lever
REPLACING THE ARMREST
HT-044PS/HT-045PS
REMOVING THE ARMREST
January 04, 2012
It is imperative that Human Touch
®
products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.
SERVICE LEVEL: 2
Tools Required: 5mm Allen wrench, 14mm open wrench and 6mm Allen wrench.
NOTE: SAVE ALL SCREWS FOR USE DURING REASSEMBLY.
1
1. Pull up on the backrest release lever on the back of the chair, then fold the backrest forward onto the seat (Fig.1).
2. Raise the armrest you want to remove to a vertical position (Fig.2).
3. Do one of the following to remove the manicure tray:
a. HT-044PS – Use a 4mm Allen Wrench to remove the two screws that secure the tray to the armrest.
b. HT-045PS/HT-0245PS – While pushing firmly on the tray release tab on the underside of the tray, pull the tray
out of the armrest (Fig.3).
(Fig.1)
(Fig.2)
(Fig.3)
For HT-045PS/HT0245PS
Release tab