Human Touch feel better HT-044PS, Инструкция по использованию и уходу

Страница: 25 / 35

3
Please send any questions or comments regarding these instructions to: documentation@humantouch.com
© 2012
Human Touch
®
, LLC.
INSTALLING THE NEW MAIN PCB BOX
1. Using a Phillips-head screwdriver, remove the seven screws that secure the new PCB box cover.
2. Connect the nine connectors to the new main PCB, then secure the cables as they were before using a new zip tie.
3. Place the PCB box into position inside the backrest frame.
4. Secure the PCB cable harnesses as they were before, using new zip ties.
5. Place the massage mechanism back into position inside the backrest, then secure it using the eight screws.
6. Place the massage mechanism side panel back into position, then secure it using the seven screws.
7. Close the backrest zipper.
8. Gently raise the backrest to the upright position, until it locks into place.
9. Plug in the chair, power it on, then verify that the chair is now working properly.