Human Touch feel better HT-044PS, Инструкция по использованию и уходу

Страница: 26 / 35

REPLACING THE MASSAGE MECHANISM
HT-044PS/HT-045PS
REMOVING THE MASSAGE MECHANISM
January 28, 2012
It is imperative that Human Touch
®
products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.
SERVICE LEVEL: 3
Tools Required: Phillips-head screwdriver, wire cutters or any instrument suitable for cutting zip ties, new zip ties (2).
NOTE: SAVE ALL SCREWS FOR USE DURING REASSEMBLY.
1
1. Power off the chair, then unplug it.
2. Pull up on the backrest release lever to release the backrest from the seat, then fold the backrest
forward onto the seat (Fig.1).
3. Using a wire cutter, cut the zip tie that secures the backrest zippers together (Fig.1).
4. Open the backrest zippers to expose the massage mechanism (Fig.2).
5. Using a Phillips-head screwdriver, remove the seven screws that secure the black plastic strip next to
the PCB box to the chair, then remove the strip from the chair (Fig.3).
6. Using a Phillips-head screwdriver, remove the eight screws that secure the massage mechanism to the
chair (Fig.4).
Massage Mechanism
Release lever
Cut the zip tie
(Fig.1)
(Fig.2) (Fig.3) (Fig.4)