Human Touch feel better HT-044PS, Инструкция по использованию и уходу

Страница: 17 / 35

REMOVING THE REMOTE CONTROL
1. Power off the chair and unplug it.
2. Push down on the backrest release lever, then fold the backrest forward
onto the chair seat (Fig.1).
3. Locate the remote bracket on the back of the backrest (Fig.2).
4. Using a Phillips-head screwdriver, remove the two screws that secure
the remote bracket to the backrest cover.
5. Pull the remote cables through the power panel, then disconnect
the connectors.
NOTE: Be sure the backrest remote connector does not fall back into the backrest.
If it does: Using the phillips-head screwdriver, remove the four screws from the power
panel, lift the power panel out of the backrest, pull the connector back through the
opening in the power panel, then replace the screws to secure it.
Tools Required: Phillips-head screwdriver
NOTE:
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
INSTALLING THE NEW REMOTE CONTROL
1. Connect the new remote control connector to the backrest remote control
connector, then push the cables into the backrest.
2. Using a Phillips-head screwdriver, replace the four remote bracket screws.
3. Power on the chair and verify that the new remote works.
REPLACING THE REMOTE
Please send any questions or comments regarding these instructions to:
documentation@humantouch.com
© 2012 Human Touch
®
, LLC.
Feb 27, 2012
It is imperative that Human Touch
®
products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.
SERVICE LEVEL: 1
(Fig.1)
REPLACING THE BACKREST
HT-044PS/HT-045PS/HT-245PS
(Fig.2)
Power panel