background image

3

humantouch.com

2

Grounding Instructions:

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance 

for electrical current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-

grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly 

installed and grounded in accordance with all local codes and ordinances.

WARNING:

 Improper connection of the equipment-grounding conductor can result in a risk of electronic shock. 

Check with a qualified electrician or serviceman if you are in doubt as to whether this product is properly grounded. 

Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a 

qualified electrician.

This product is for use on a normal 120-volt circuit and has a grounding plug that looks like the plug illustrated in 

sketch (A). A temporary adapter that looks like the adapter used in sketches (B) and (C) may be used to connect this 

plug to a 2-pole receptacle as shown in sketch (B), if a properly grounded plug is not available. The temporary adapter 

should be used only until a properly grounded outlet (sketch A) can be installed by a qualified electrician. The green 

colored, rigid ear tab or the like extending from the adapter must be connected to a permanent ground such as a 

properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

keep it 

safe

Read all instructions before using this appliance.

SAVE THESE INSTRUCTIONS

Safety Precautions

IMPORTANT SAFETY INSTRUCTIONS

•  Do not put hands or fingers near the massage mechanism or rollers while this product is running. Touching the mechanism 

 

  can result in injury from the rollers squeezing together.

•  If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in 

 

  order to avoid a hazard.

•  An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or 

 

  taking off parts. 

•  Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons. 
•  Close supervision is necessary when this product is used by, on, or near children, invalids, or disabled persons. Keep

 

  children away from extended foot support (or other similar  parts).

•  Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
•  Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, 

 

  or dropped into water. Return this product to a  service center for examination and repair.

•  Do not carry this  appliance by supply cord or use cord as a handle.
•  Always keep the power cord away from heated surfaces.
•  Never operate this product with the air openings blocked. Keep the air openings free of lint, hair, and the like. 
•  Never drop or insert any object into any opening.
•  Do not use outdoors.
•  Do not operate where  aerosol (spray) products are being used or where oxygen is being administered.
•  To disconnect, turn all controls to the OFF position, then remove plug from outlet.
•  Do not massage any area of the body that is swollen, inflamed or covered with skin eruptions.
•  Do not use on unexplained calf pain.
•  Do not use this product when standing on a damp floor, or when any part of the body is in contact with plumbing or any 

 

  similar ground.

•  Connect this appliance to  a properly grounded outlet only. See GROUNDING INSTRUCTIONS.
•  Do not use this product if noise above normal sound is heard.
•  Do not stand on or in  appliance. Use only while seated.
•  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack 

 

  of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person  
  responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

DANGER:

 

To reduce the risk of electrical shock

Always unplug this product from the electrical outlet immediately after using and before cleaning.

WARNING:

 To reduce the risk of burns, fire, electric shock or injury to persons:

•  Comfortable clothing is  recommended while using this product. 
•  This product was meant to  be used in a relaxed position. Never force any body part into the backrest area while the rollers 

 

  are moving. 

•  If you feel any abnormal  discomfort during the operation of this product, turn off the power immediately and do not use the 

 

  product. Consult your physician. 

•  Do not sit on the  controller. 
•  Do not pull on the AC cord.
•  When using this product after it has been in storage, check to see that the product is operating properly prior to use.

 

•  Always confirm that there are no obstacles behind the product and that there is sufficient space to recline. 

When using an electrical appliance, basic precautions should always be followed, including the following:

Do not attempt to repair this product yourself.

 

This product is designed for personal in-home use. Commercial use will void warranty.

Grounding methods:

For all grounded cord-connected products:

Grounded

Outlet

Grounded 

Outlet Box

Adapter

Tab for

Grounding Screw

Metal
Screw

(A)

(B)

(C)

The use of a temporary adaptor is not permitted in Canada.

Grounding

Pin

Содержание feel better HT-044PS




































Отзывы: