Human Touch feel better HT-044PS, Инструкция по использованию и уходу

Страница: 28 / 35

REPLACING THE BACKREST ACTUATOR
HT-044PS/HT-045PS
REMOVING THE BACKREST ACTUATOR
Jan 04, 2012
It is imperative that Human Touch
®
products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.
SERVICE LEVEL: 3
Tools Required: Phillips-head screwdriver, small flat-head screwdriver, wire cutters or any other instrument suitable
for cutting zip ties, new zip ties (2). NOTE: SAVE ALL SCREWS FOR USE DURING REASSEMBLY.
1
1. Power off the chair, then unplug it.
2. Pull up on the backrest release lever on the back of the chair, then fold the backrest forward onto the seat (Fig.1).
3. Using a small flat-head screwdriver, remove the “C” clip and pin from the rear of the slide actuator (Fig.2).
4. Fold the backrest backward into a reclined position (Fig.3).
5. Remove the seat cushion from the chair (Fig.4).
Release lever
(Fig.1)
(Fig.2)
(Fig.3) (Fig.4)
“C” clip
Seat cushion