Human Touch feel better HT-044PS, Инструкция по использованию и уходу

Страница: 23 / 35

Release lever
REPLACING THE MAIN PCB BOX
HT-044PS/HT-045PS
REMOVING THE MAIN PCB BOX
Feb 8, 2012
It is imperative that Human Touch
®
products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.
SERVICE LEVEL: 3
Tools Required:
Phillips-head screwdriver, wire cutters or any instrument suitable for cutting zip ties, new zip ties (2).
NOTE:
SAVE ALL SCREWS FOR USE DURING REASSEMBLY.
1
1. Power off the chair, then unplug it.
2. Locate the backrest release lever on the back of the backrest, pull up on the lever to
release the backrest from the seat, then fold the backrest forward onto the seat (Fig.1).
3. Using a wire cutter, cut the zip tie that secures the backrest zippers together (Fig.2).
4. Open the backrest zippers.
5. Using a Phillips-head screwdriver, remove the two screws that secure the main PCB box
to the chair (Fig.3).
(Fig.1)
(Fig.2)
(Fig.3)
Cut the zip tie