Human Touch feel better HT-044PS, Инструкция по использованию и уходу

Страница: 16 / 35

REMOVING THE POWER PANEL
1. Power off the chair and unplug it.
2. Push down on the backrest release lever, then fold the backrest forward
onto the chair seat (Fig.1).
3. Locate the power panel on the back of the backrest (Fig.2).
4. Using a Phillips-head screwdriver, remove the four screws that secure
the power panel to the backrest cover.
5. Lift the power panel out of the backrest, then disconnect the connectors.
Tools Required: Phillips-head screwdriver
NOTE:
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
INSTALLING THE NEW POWER PANEL
1. Connect the new power panel connectors to the backrest corresponding connectors
in the backrest, then push the power panel into the backrest.
2. Using a Phillips-head screwdriver, replace the four power panel screws.
3. Power on the chair and verify that the chair is working properly.
REPLACING THE POWER PANEL
Please send any questions or comments regarding these instructions to:
documentation@humantouch.com
© 2012 Human Touch
®
, LLC.
Feb 28, 2012
It is imperative that Human Touch
®
products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.
SERVICE LEVEL: 1
(Fig.1)
HT-044PS/HT-045PS/HT-245PS
(Fig.2)
Power panel