HP StorageWorks 300, Руководство пользователя

Страница: 42 / 180

4. Select the disk to remove from the host ( Figure 19 ).
Figure 19 Unpresent Host(s) window
5. Click on Unpresent host(s) .
6. Click OK from the con fi rmation dialog box.
7. Click OK under
Operation Succeeded
in the status pane.
8. If there is a break in numbering of the remaining LUNs, LUN numbers after the break must be
recon fi gured. See Multi-node setup for detailed instructions.
CAUTION:
LUN numbering must be sequential with no gaps. Gaps in LUN numbering will prevent the VLS300
from recognizing any nodes with any LUNs after the gap. For example, if LUN numbering is 0, 1, 2,
4, 5, the VLS300 will not recognize LUNs 4 and 5.
Con fi guring storage pools
VLS auto creates the fi rst storage pool, but you must create any additional pools. To do so:
NOTE:
The VLS300 can have either one storage pool for all LUNs, or one storage pool for each array. Refer to
the solutions guide for details.
42
Storage con fi guration