HP StorageWorks 300, Руководство пользователя

Страница: 139 / 180

Figure 84 Aligning the processor pins with the socket holes
3. Install the processor and close the processor locking lever (2) and processor retaining clips (1).
1
1
2
3
Figure 85 Closing the processor locking lever and retaining clips
4. Lower the processor retaining card.
5. Install the access panel. See Installing the VLS node access panel .
6. Slide the node into the rack.
7. Power on the node. See Powering on the VLS300 system .
Replacing a primary node
CAUTION:
Each VLS300 node weighs 16.78 kg (37 lb) full. At least two people are required to lift and move
each node.
To replace a primary node:
1. Remove the existing node from the rack:
a. Power off the system. See Powering off the system .
b. From the back of the node, make a note of all cable connections then disconnect the cables.
HP StorageWorks
139